Showing posts sorted by date for query stair build. Sort by relevance Show all posts
Showing posts sorted by date for query stair build. Sort by relevance Show all posts

Monday, 11 April 2011

How to Build Basement Stairs on a Budget

Basement stairs come in all shapes and sizes from the very simple utility/access stairs to the more elaborate decorative stairs in which the basement is expanded to be a major part of the living area. One of the major issues facing the stair builder is the unpredictable overall stair height that often occurs with basement stairs. Whether new or existing construction the basement slab height nearly always seems to vary up or down making pre-built stairs problematic. For this reason basement stairs are usually built to customized heights.

The normal procedure in the industry is to call out a stair specialist to custom build the stair using 2 x12 cut stringers as framing for constructing the stair. This can be a difficult and costly process requiring a high degree of skill. However, there is an easier solution available that will save you time as well as money. The system consists of self-adjusting, stair building brackets, used to form an "engineered stair". Adjustable stair building brackets provide a custom, tailored approach to stair building that is much faster, easier and stronger than conventional construction. They're an easy, low cost and simple solution for any custom basement stair building.

This bracket system can quickly form a basic utility stair or an elaborate, fully finished hardwood stair. The adjustable stair building brackets basically do the work for you, making the stair building process simple and streamlined. The brackets are approved as adjustable joist hangers which automatically adjust to form any rise or run required while at the same time, allowing the risers to be structurally attached between the stringers, carrying the load across the stair like stepping floor joists.

Only two outside stringers are required because they are full depth, without notching (unlike conventional cut stringers) and they're engineered to carry much greater loads than conventional cut stringers. Additionally, only three to four end cuts are required per stringer which eliminate approximately seventy saw cuts when compared to conventional cut stringers for basement stairs.

The adjustable stair building brackets may be used with many different materials including pine, MDF treads, hardwoods etc. The adjustable stair building brackets allow for customized rise and tread configurations which can be adjusted to meet all building codes for both interior and exterior applications.

The first thing you need to do is to determine the material you are going to use, the exact number of steps and the stair width. A fully interactive stair calculator is available online which further simplifies the process.

For materials, you will need (2) 2 x6's per stringer member for both sides. The stringers should be straight without any twist. The 2x6's should be at least 12" longer than the total length of your stair.

Adjustable brackets will allow stairs to be built up to nine feet in width, using only the two outside stringers. Use 2x8's for risers with heights up to 7-1/4" and 2 x10's for risers over 7-1/4". Treads may be 2x12's, 5/4 pine, 5/4 hardwood, sturdy floor ripped to size or MDF etc. Pre-cut risers and treads exactly to length once you figure out how many steps you need and their width- this will save time.

You start by setting the brackets on two 2x6 stringer members using the reusable spacers and pivot screws. Once set, remove spacers and rotate the brackets to adjust stair rise and run. Fix the brackets in position and attach the risers and treads. 3D demos will explain the process clearly- see link below.

Tools and other materials needed will be: Power drill, saw (preferably power saw),# 8 1-1/4" Phillips head, star or square drive screws for the stair building brackets, #8 2-1/2" screws for every 9 " of tread and riser connections and spacers to customize the rise and tread configurations.

ICC-ES approved, this" Engineered Stair Building System" eliminates the need to cut stringers and has been tested to be faster and much stronger than conventionally constructed stairs. Savings of $500 per flight of stairs and more are not uncommon with adjustable stair building brackets. Using this system, both professionals and do-it-yourselfers will build cost efficient basement stairs, without sacrificing quality, accuracy, strength or appearance.

Tag : stair lifts,stair,stair build,budget

Wednesday, 12 January 2011

About Stair Lifts

Handicap stair lift is another form of stairlift but they are not exactly the same. A stairlift can serve as a multipurpose equipment that can carry wheelchairs and transportation carts. On the other hand handicap stair lift are used solely for users with disability and unable to ascend a flight of stairs. Handicap stair lifts are manufactured in different models to suit the different stairs it will be installed in. There are the straight handicap stair lifts and curved handicap stair lifts that are for curved staircases. Whatever the kinds of rails used, the stair lifts can be used to transport heavy stuff between floors. Standard stair lifts measure about 25 inches and the rails weigh 30kg. Stair lift can be folded compactly against the wall when it is not required. The platforms are pulled by cable or chain along the rail track. The seats on the handicap stair lifts are comfortable with footrests and armrests. The seat heights are adjustable too.

Handicap stairlifts are simple to operate and can function at the touch of an on and off button. Curved stair lifts are more expensive as they require the manufacturers to send engineers to the house to measure the curved stairs and build according to the dimensions. Handicap wheelchair stair lift are well fitted with safety features to ensure the well being of the users on top. However, one should still be caution when buying used stair lifts. For a start, when checking the used lift, always ensure it has a safety belt. Some lifts have been operating for years and the safety belt may have worn off. This is highly dangerous for handicap stairlift users as they may fall off the stair lift during movements.

When purchasing stairlift, you should consider the models and the profile of the users before shelling out a substantial amount to buy.While choosing the handicap lift, one should keep the user's disability in mind. The user of the stair lift should get themselves in and out of the lift seat comfortably with little or no assistance. They should also be able to stand on their own two feet for a short amount of time. Handicap lift still require a fair amount of user effort to fulfill its potential. If the user is unable to transfer out of the wheelchair comfortably and has problems standing, chances are the handicap stairlift does not meet the need. If the user is able to stand on his own, we can use a perched stair lift.

They should also have the strength to manually push the buttons on the stair lift. I can understand some users may experience problems exerting strengths with their fingers. Users with these problems should choose handicap stair lifts which are operated by sensors or maybe voice commands. These special lifts will cost more due to the additional technology built in. Users must be able to keep their upper body upright on their own without a back support. Because if they do not maintain their posture on the handicap stairlift, they face the danger of slipping off the lift seat and further injuring themselves. Last but not least, the safety belt should be in working condition and secure the user firmly in place.

Handicap stair lift that intends to carry wheelchairs up and down the staircase have to be assessed separately as the different wheelchairs have to be taken into consideration. The size and weight of the wheelchair should be taken into consideration. The stair lift chair will also be considered as users of all age range might be using the lifts. User issues such as stiff knee can be addressed by have a handicap lift that leans forward and wider stair chairs. Fear of heights can be reduced by installing handrails for users to hold on while on the handicap stair lift. Guardrails have the ability to provide additional assurance and safety to the users, hence, lessening their fear and anxiety.

As handicap lift users may have different disabilities, there are a variety of controls that suit different users comfortably. For example, users with bad eyesight can respond the the audio signals given out by the stair lift when it is moving or terminating. There are handicap stair lifts which have sensors built in across its platform. These stair lift sensors pick out obstacles in the path of the handicap stair lift and stop moving upon detecting danger. These sensors should be found in old stairlifts too. Sensors can also double as speed delimiters to check the speed of the moving handicap stair lift. A safe travel speed is around 0.15 meters per second for straight rails handicap stairlifts and much slower for curved rails stairlifts.

Tag : stair lifts,handicap stair lifts,acorn stair lift,stair design

Article Source: http://EzineArticles.com/?expert=K_Koh


Monday, 27 December 2010

How to Build Basement Stairs on a Budget

Basement stairs come in all shapes and sizes from the very simple utility/access stairs to the more elaborate decorative stairs in which the basement is expanded to be a major part of the living area. One of the major issues facing the stair builder is the unpredictable overall stair height that often occurs with basement stairs. Whether new or existing construction the basement slab height nearly always seems to vary up or down making pre-built stairs problematic. For this reason basement stairs are usually built to customized heights.

The normal procedure in the industry is to call out a stair specialist to custom build the stair using 2 x12 cut stringers as framing for constructing the stair. This can be a difficult and costly process requiring a high degree of skill. However, there is an easier solution available that will save you time as well as money. The system consists of self-adjusting, stair building brackets, used to form an "engineered stair". Adjustable stair building brackets provide a custom, tailored approach to stair building that is much faster, easier and stronger than conventional construction. They're an easy, low cost and simple solution for any custom basement stair building.

This bracket system can quickly form a basic utility stair or an elaborate, fully finished hardwood stair. The adjustable stair building brackets basically do the work for you, making the stair building process simple and streamlined. The brackets are approved as adjustable joist hangers which automatically adjust to form any rise or run required while at the same time, allowing the risers to be structurally attached between the stringers, carrying the load across the stair like stepping floor joists.

Only two outside stringers are required because they are full depth, without notching (unlike conventional cut stringers) and they're engineered to carry much greater loads than conventional cut stringers. Additionally, only three to four end cuts are required per stringer which eliminate approximately seventy saw cuts when compared to conventional cut stringers for basement stairs.

The adjustable stair building brackets may be used with many different materials including pine, MDF treads, hardwoods etc. The adjustable stair building brackets allow for customized rise and tread configurations which can be adjusted to meet all building codes for both interior and exterior applications.

The first thing you need to do is to determine the material you are going to use, the exact number of steps and the stair width. A fully interactive stair calculator is available online which further simplifies the process.

For materials, you will need (2) 2 x6's per stringer member for both sides. The stringers should be straight without any twist. The 2x6's should be at least 12" longer than the total length of your stair.

Adjustable brackets will allow stairs to be built up to nine feet in width, using only the two outside stringers. Use 2x8's for risers with heights up to 7-1/4" and 2 x10's for risers over 7-1/4". Treads may be 2x12's, 5/4 pine, 5/4 hardwood, sturdy floor ripped to size or MDF etc. Pre-cut risers and treads exactly to length once you figure out how many steps you need and their width- this will save time.

You start by setting the brackets on two 2x6 stringer members using the reusable spacers and pivot screws. Once set, remove spacers and rotate the brackets to adjust stair rise and run. Fix the brackets in position and attach the risers and treads. 3D demos will explain the process clearly- see link below.

Tools and other materials needed will be: Power drill, saw (preferably power saw),# 8 1-1/4" Phillips head, star or square drive screws for the stair building brackets, #8 2-1/2" screws for every 9 " of tread and riser connections and spacers to customize the rise and tread configurations.

ICC-ES approved, this" Engineered Stair Building System" eliminates the need to cut stringers and has been tested to be faster and much stronger than conventionally constructed stairs. Savings of $500 per flight of stairs and more are not uncommon with adjustable stair building brackets. Using this system, both professionals and do-it-yourselfers will build cost efficient basement stairs, without sacrificing quality, accuracy, strength or appearance.

Article Source: http://EzineArticles.com/?expert=Richard_Truckner

Friday, 17 December 2010

Building Deck Stairs on a Budget

As a professional, I've built many decks of all sizes and shapes. Stairs are often the last part of the deck to be tackled because they are usually the most difficult and expensive part of the deck to build. However, by using a method known as the 'engineered bracket system', not only can I save up to $500 per flight of stairs, but the installation is easy, with professional results.

The adjustable stair bracket system automatically adjusts to the exact rise and run needed. The customized rise and treads configurations can be adjusted to meet all building codes for any interior or exterior application. The brackets act as joist hangers which allow the stair risers to be used structurally, carrying the load across the stair like floor joists. Using only two outside stringers, the stair width can be up to nine feet wide and the stairs are strong. The need for interior stringers is eliminated. The outside stringers then require only 3 to 4 cuts each, and the risers and treads are simply attached to the brackets. If you make a mistake, you can readjust the brackets.

A wide range of materials such as redwood, cedar, tropical wood, treated wood, untreated wood, vinyl, steel, and composites can be used. Adjustable brackets allow for customized rise and tread configurations which can be adjusted to meet all building codes for any interior or exterior application.

This is how it works: Set the brackets on the two 2x6 stringer members using the spacers and pivot screws. Remove spacers and rotate brackets to adjust stair height. Fix brackets in position, attach risers and treads. 3D video demos are available on the website below.

Before you begin, determine the material you are going to use, the exact number of steps you need and the stair width.

You will need (2) 2x6's per stringer for each side. Make sure when you purchase your 2x6's make sure that they are straight without any twist. The 2x6's will need to be at least 12" longer than the total length of your stairs. Two stringers are sufficient to span up to 7' wide (exterior stair requirements).

For risers you will use 2x8's for riser heights up to 7-1/4" and 2x10's for higher risers. For treads you can use 2x12's (which is the easiest option). However, if you decide to use (2) 6 inch wide treads instead...wood or composite, you will need to use cleat brackets to bridge between the risers for tread support. Time saving tip: when you determine how many steps you will need and your stair width....get all your risers and treads pre-cut to exact lengths when you purchase the materials.

Tools/Materials needed will be: a power drill, saw (skill saw is preferable, but not required, #8 1 1/4" Phillips flat head or star/square drive screws for the stair brackets, #8 2 1/2" deck screws for every 9" of tread and riser connection and Spacers for customized riser and tread measurements.

The "Engineered Stair Bracket System" method eliminates the need to cut stringers and is tested to be much stronger and faster than conventional construction. Whether you're a seasoned professional or a do-it-yourselfer, you will build fast, strong and accurate stairs, on a budget.

Article Source: http://EzineArticles.com/?expert=Richard_Truckner

Saturday, 11 December 2010

Poor Deck and Stair Construction Can Kill

In a recent article published in The Los Angeles Times, July 6th of this year, a tragic deck collapse resulting in serious injury and death, is reported. The deck was part of a three story apartment complex in a Birmingham suburb. Seven party-goers is all it took to create this tragic event. Unfortunately, this is an all to common occurrence now days. Reports are continually surfacing, confirming the growing frequency of these serious, life threatening collapses.

Over the past several years, much has been done to address deck and stair safety issues, but we still have a long way to go. One glaring example of the failure in deck and stair safety protocol is the industry standard of permitting "hot dipped galvanized" anchors, screws, hangers and other hardware to be in direct contact with ACQ, pressure treated wood. The galvanic corrosion created between the high copper content of the wood and the galvanizing is so severe that the normal industry standard of G90 galvanizing will corrode in as little as 12 months and G185, such as Z-Max® can be gone in 24 months. The industry (including code officials) has adopted G185 as a fall back position with no engineering testing available to substantiate the validity or longevity of this adoption...this is a "knee jerk" reaction and is an accident waiting to happen. Without a barrier between the pressure treated wood and galvanized hardware, serious corrosion is inevitable.

Take for example the new NADRA (North American Deck and Railing Association) study that examined the number of injuries caused by outdoor deck stairs and porches from 2003 to 2007. The report confirms that deck and stair injuries are on the increase. NADRA points to a 2003 study showing a total of 37,760 injuries which required a visit to the hospital. Of these injuries, 6,120 were a result of structural failure or collapse. Further, the report shows that by 2007, the incidents of serious injury had risen to 55,160. Quoting from the report- "Nearly 15% of all injuries are a result of structural failure". Wood decks are constantly exposed to the elements and they have a limited life span of 10-15 years. As you can see, important to have your deck and deck stairs inspected so that signs of wood decay and deterioration can be repaired.

Other codes address "rail post support" safety. A rail post per code regulations is required to support a lateral load of 200 lbs. This is a poorly enforced area of the code and with many inspectors content with the bump test. If it doesn't move too much when they bump it with their hip, the rail will pass inspection. Many rail posts are simply lagged or nailed to the rim joists and post which are mounted directly to the deck surface will simply not meet code. The tragedy is, there are systems available on the market that correctly address this problem. Simpson, USP and Deck-Loc have brackets which will meet code for rim joist attachment but there's only one adjustable bracket system (discussed below) which will meet code for wood or composite stairs.

Attention is now being given to the ability of the vertical post's strength when hit by various degrees of lateral thrust pressure. These new directives, requiring the vertical rail post to support a minimum of 200 lbs. of lateral thrust, is making engineered stair systems extremely popular, with their ability to withstand over 500 lbs of lateral thrust for the 'rail post support' structural sections of the overall decking plans.

Stairs are perhaps the most overlooked area of construction. Stairs using standard cut stringers have been used for eons and are "grandfathered" into code as accepted construction. Stringers are cut from 2x12's and greatly weakened in the process. Several stringers are then run longitudinal down length of the stair to make up for the strength loss during cutting. Long stair run tend to bounce and stringer failure is not uncommon. Additionally, many of these stairs are built without risers which is a "child safety" issue in many states. General Contractor and renowned professional deck builder, Pat Noonan of Minnesota says, "Of the 50+ decks I have torn off and replaced, not one had a stair system that outlasted the deck." The majority of them had shaky, unsafe stairs, and it was the main reason they were doing the rest of the deck."

Engineered stair systems such as adjustable bracket systems for wood stair and composite stairs overcome many of these problems and safety issues. This is due to the much more rigorous testing required to gain ICC/ES acceptance for a stair system which has not been simply "grand fathered" into common use. This adjustable bracket system is engineered in a completely different manner to conventional stair construction. These adjustable steel brackets lock the risers and treads onto the stringers, with a solid, joist hanger type connection. Only two stringers are required for stairs up to 7' in width. This becomes possible because the two outside stringers are full depth, acting like beams running down the length of the stair ( only three end are cuts required per stringer). Next, the risers (which are locked to the steel brackets) span across the stair like joist hangers, at each step supporting the tread.

The result is a "rock solid" stair which has been tested at over 1,200 lbs. per sq. ft.(uniform distributed load), well in excess of the code requirement of only 100 lbs per sq. ft. (commercial load). The steel brackets adjust to form any rise or run required and are powder coated over a hot dipped galvanized finish. The powder coating (paint) sets up an effective barrier between the pressure treated wood and the galvanized finish, preventing corrosion. Additionally the structural risers overcome the child safety issue (found on stairs without risers) and as mentioned above, the brackets have been tested to exceed code requirements for lateral load applied to "rail post" supports.

General Contractor Pat Noonan continues, "Craftsmanship will only take you so far when you are dealing with a inferior framing system and components. When deck builders notch steps out of a 2"x12", they are cutting all the strength out of the wood and putting the entire weight of the stair plus anyone walking up or down on 4" of wood left in the 2"x12". With an adjustable bracket system, they are putting the weight on 11' of solid wood- there's no comparison".

EZ Stairs adjustable bracket stair system allows builders to construct stairs with a wide range of materials such as redwood, cedar, tropical wood, treated wood, untreated wood, vinyl, steel, and composites. This stair system allows for customized rise and treads configurations which can be adjusted to meet all building codes for any interior or exterior application- ICC approved. It is the only adjustable stair bracket system available anywhere. The EZ Stairs system will allow you to build strong, easy to install stairs, in less time and with less money than traditional construction. You will have stairs that will last for many years longer than conventional stair construction.To help you figure out how many stairs you will need, the website provides a free stair calculator.

Tag : stair lifts,stair desigh,stair railing

Article Source: http://EzineArticles.com/?expert=Richard_Truckner

Saturday, 5 June 2010

How to Build Basement Stairs on a Budget

Basement stairs come in all shapes and sizes from the very simple utility/access stairs to the more elaborate decorative stairs in which the basement is expanded to be a major part of the living area. One of the major issues facing the stair builder is the unpredictable overall stair height that often occurs with basement stairs. Whether new or existing construction the basement slab height nearly always seems to vary up or down making pre-built stairs problematic. For this reason basement stairs are usually built to customized heights.

The normal procedure in the industry is to call out a stair specialist to custom build the stair using 2 x12 cut stringers as framing for constructing the stair. This can be a difficult and costly process requiring a high degree of skill. However, there is an easier solution available that will save you time as well as money. The system consists of self-adjusting, stair building brackets, used to form an "engineered stair". Adjustable stair building brackets provide a custom, tailored approach to stair building that is much faster, easier and stronger than conventional construction. They're an easy, low cost and simple solution for any custom basement stair building.

This bracket system can quickly form a basic utility stair or an elaborate, fully finished hardwood stair. The adjustable stair building brackets basically do the work for you, making the stair building process simple and streamlined. The brackets are approved as adjustable joist hangers which automatically adjust to form any rise or run required while at the same time, allowing the risers to be structurally attached between the stringers, carrying the load across the stair like stepping floor joists.

Only two outside stringers are required because they are full depth, without notching (unlike conventional cut stringers) and they're engineered to carry much greater loads than conventional cut stringers. Additionally, only three to four end cuts are required per stringer which eliminate approximately seventy saw cuts when compared to conventional cut stringers for basement stairs.

The adjustable stair building brackets may be used with many different materials including pine, MDF treads, hardwoods etc. The adjustable stair building brackets allow for customized rise and tread configurations which can be adjusted to meet all building codes for both interior and exterior applications.

The first thing you need to do is to determine the material you are going to use, the exact number of steps and the stair width. A fully interactive stair calculator is available online which further simplifies the process.

For materials, you will need (2) 2 x6's per stringer member for both sides. The stringers should be straight without any twist. The 2x6's should be at least 12" longer than the total length of your stair.

Adjustable brackets will allow stairs to be built up to nine feet in width, using only the two outside stringers. Use 2x8's for risers with heights up to 7-1/4" and 2 x10's for risers over 7-1/4". Treads may be 2x12's, 5/4 pine, 5/4 hardwood, sturdy floor ripped to size or MDF etc. Pre-cut risers and treads exactly to length once you figure out how many steps you need and their width- this will save time.

You start by setting the brackets on two 2x6 stringer members using the reusable spacers and pivot screws. Once set, remove spacers and rotate the brackets to adjust stair rise and run. Fix the brackets in position and attach the risers and treads. 3D demos will explain the process clearly- see link below.

Tools and other materials needed will be: Power drill, saw (preferably power saw),# 8 1-1/4" Phillips head, star or square drive screws for the stair building brackets, #8 2-1/2" screws for every 9 " of tread and riser connections and spacers to customize the rise and tread configurations.

ICC-ES approved, this" Engineered Stair Building System" eliminates the need to cut stringers and has been tested to be faster and much stronger than conventionally constructed stairs. Savings of $500 per flight of stairs and more are not uncommon with adjustable stair building brackets. Using this system, both professionals and do-it-yourselfers will build cost efficient basement stairs, without sacrificing quality, accuracy, strength or appearance.

Article Source: http://EzineArticles.com/?expert=Richard_Truckner

Wednesday, 10 June 2009

Building Deck Stairs on a Budget - By Richard Truckner / Leslie ...

As a professional, I’ve built many decks of all sizes and shapes. Stairs are often the last part of the deck to be tackled because they are usually the most difficult and expensive part of the deck to build. However, by using a method known as the ‘engineered bracket system’, not only can I save up to $500 per flight of wood stairs, but the installation is easy, with professional results.


The adjustable stair bracket system automatically adjusts to the exact rise and run needed. The customized rise and treads configurations can be adjusted to meet all building codes for any interior or exterior application. The brackets act as joist hangers which allow the stair risers to be used structurally, carrying the load across the stair like floor joists. Using only two outside stringers, the stair width can be up to nine feet wide and the stairs are strong. The need for interior stringers is eliminated. The outside stringers then require only 3 to 4 cuts each, and the risers and treads are simply attached to the brackets. If you make a mistake, you can readjust the brackets.


A wide range of materials such as redwood, cedar, tropical wood, treated wood, untreated wood, vinyl, steel, and composites can be used. Adjustable brackets allow for customized rise and tread configurations which can be adjusted to meet all building codes for any interior or exterior application.


This is how it works: Set the brackets on the two 2×6 stringer members using the spacers and pivot screws. Remove spacers and rotate brackets to adjust stair height. Fix brackets in position, attach risers and treads. 3D video demos are available on the website below.


Before you begin, determine the material you are going to use, the exact number of steps you need and the stair width.


You will need (2) 2×6’s per stringer for each side. Make sure when you purchase your 2×6’s make sure that they are straight without any twist. The 2×6’s will need to be at least 12″ longer than the total length of your stairs. Two stringers are sufficient to span up to 7′ wide (exterior stair requirements).


For risers you will use 2×8’s for riser heights up to 7-1/4″ and 2×10’s for higher risers. For treads you can use 2×12’s (which is the easiest option). However, if you decide to use (2) 6 inch wide treads instead…wood or composite, you will need to use cleat brackets to bridge between the risers for tread support. Time saving tip: when you determine how many steps you will need and your stair width….get all your risers and treads pre-cut to exact lengths when you purchase the materials.


Tools/Materials needed will be: a power drill, saw (skill saw is preferable, but not required, #8 1 1/4″ Phillips flat head or star/square drive screws for the stair brackets, #8 2 1/2″ deck screws for every 9″ of tread and riser connection and Spacers for customized riser and tread measurements.


The “Engineered Stair Bracket System” method eliminates the need to cut stringers and is tested to be much stronger and faster than conventional construction. Whether you’re a seasoned professional or a do-it-yourselfer, you will build fast, strong and accurate stairs, on a budget.


EZ Stairs is the only adjustable, engineered stair bracket system available anywhere, ICC approved. It won Pro Sales Magazine’s Editor’s 2004 Choice award for new product innovation in construction. EZ Stairs’ composite deck stairs compatibility solution was chosen for LBM Journal’s ‘Hot Products’ Award at the 2005 and 2008 International Builders Show. Easy installation, strong and professional. The system is engineered so that even someone with minimal building skills, can build stairs easily, and pros can just build faster- equaling more profit. For more information, visit the ez-stair.com website, or call 866-693-9570. See an EZ Stairs 3D demo and photos.


About the Author

Richard Truckner, holder of 12 plus patents in construction related products. Bachelor of Technology in Architecture; career spanning 40 plus years. Richard is the inventor of EZ Stairs.

http://www.articlerich.com/blog/home-improvement/building-deck-stairs-on-a-budget-by-richard-truckner-leslie-walker

Friday, 17 April 2009

Affordable Home Stair Lifts

Affordable home stair lifts help the elderly and disabled negotiate stairs safely and move about independently. If one trips while ascending or descending staircases, it is likely to result in fatal or serious falls. A stair lift seats an individual and travels at a measured pace through rails fixed to the side of the staircase. It’s powered by electricity and is a safe accessibility option for the aged and the disabled.


Stair Lifts Available for Straight and Curved Staircases

Home stairlifts are available at affordable rates. Electric versions are the most common among stairlifts while battery-powered units are also available. Staircases are typically straight or curved. Rails for straight stair lifts are simpler to build but affordable lifts for curved stairs are also available. Technological advancements have made stair lifts safer than when they were first introduced in the 1930s. Stair chair lifts have the following important features:


• Rechargeable battery-powered movement during power failure
• Obstruction sensors
• Folding up facility for better space management when not in use
• Wireless controls


Variety of Models Available in the Market


ThyssenKrupp Access and Savaria Concord are two of the popular major elevator and stairlift manufacturers for residential and commercial purposes. A wide variety of stair lifts are available to suit the homes and needs of various customers. Apart from the common ones, there are wheelchair-specific stair lifts consisting of a platform where the disabled individual can move in with his wheelchair. This kind requires a considerable amount of space, though.


Standing and perching models are ideal for narrow staircases. In the former, the individual needs to stand on the platform holding a guardrail, while the perching stair chair lift allows for a mild seating posture.


Depending on the budget of customers and the kind of individuals using them, affordable stair lifts for the home are easily available.


Article Source: http://www.articlesbase.com/home-improvement-articles/affordable-home-stair-lifts-705231.html

Tuesday, 20 January 2009

Benefits of Stair Exercises

Stair exercises are one of the best exercises that can get you fit very quickly. If you do not have access to a gym, you can use your own body weight and do stair exercises.


Being a personal trainer, I always hear that “I can not work out because I do not have access to a gym when I go on a business trip”. That is totally nonsense. I always recommend bring a pair of your sneakers and your work out clothing.


Sometimes your hotel might have a gym, or maybe they might not have a gym for their customers to use. However, I do know that pretty much any building that has more than one floor has a flight of stairs.


Below are some of the benefits of stair exercises:

  • Improve your strength
  • Improve your power output
  • Improve your flexibility
  • Improve your balance
  • Improve your coordination
  • Reduce your body fat levels
  • Your exercise workouts can be finished in as little as in fifteen minutes
  • No equipment is required only your body weight and a flight of stairs
  • Improve in your anaerobic conditioning
  • Have more a ton more endurance in your legs
  • Improve in your aerobic conditioning
  • Build buns of steel.


Here are two types of work outs that you can do to get fit.


Aerobic work outs—this is very simple! Just walk up a flight of stairs without holding on the handle. Walk in a comfortable pace while getting your heart rate up. If you feel that it is too easy, you can simply walk faster.


Leg strength and muscle build work outs—this is a variation of the first work out. You can simply walk 2 steps at a time. After a flight or two, you should feel that your quads and your butt burn! If this gets too easy, you can add some external weight such as a pair of dumb bells or a weight vest to increase intensity.


Gary Cheung is fitness professional in New York City. He has helped many people change their lives. He currently runs a free informational website on fitness and weight loss. For more information on stair exercises and bodyweight exercises. Please visit: http://www.weightlossmasterpiece.com


Article Source: http://EzineArticles.com/?expert=Gary_Cheung

Sunday, 28 December 2008

Having a Good Staircase Should Have a Great Stair Parts

Many people wanted to beautify their own houses just to stand out and be unique to other houses and most of the time, interior and exterior designs really matters for most. Nowadays, houses are built according to the desires of the homeowner. Most of the time one level or more than one level is much preferred which have at least one staircase.


The kind of staircase vary in different kinds and differs mostly of the materials to be used, general shape and design, construction methods and the number of features you wanted for your staircase. Beforehand, of course you need to provide the stair parts in order to have a good stair case.


Staircase is considered to be a central part of anyone's home. It could be steep or gradual, and narrow or wide; it's a matter of your own choice. Most of the time, people prefer their staircase to be built in place by stair makers, finish carpenters, and others prefer those factory manufactured, and woodworkers. It is best to get an expert finis carpenter to install your stair parts and other materials so that you can instruct him whether you wanted some changes for it.


You have to bear in mind that your stair's design is profoundly affected by its function, so better choose the best and consider the functions as well. Whether you wanted an entry stairway or a spiral stairs, it is really up to your own desire. Entry stairway are usually build straight to the second floor when you have a two level house, while spiral stairs are usually build in going to terraces of your house; it is a good stylistic stairs ever for most. In spite of its type, all stairs has the same primary parts in which many people really love to have for their own home.


Bear in mind that all stairs are built according to principles that is intended for safer use. So if you want the best stairs for your home, then find the best stair parts that have the best style and purpose. More people nowadays are looking for stair parts that are unique compared to others. Unique is such a manner that you are the only one that has this style and no any other owns like your style. For many, staircase design really matters most because for them it gives a large impact for the overall outlook of the house and at the same time staircase design and stair parts can really mean something to look upon by any guest that you will have in your house.


Eliza Maledevic Ayson writes for Jump2top - SEO Company

Article Source: http://EzineArticles.com/?expert=Eliza_Maledevic

Wednesday, 24 December 2008

How Hard Is It To Build Straight Stairs

Thinking of doing it yourself. wondering if you can do it. The Contractor down the street made it look easy. But how am I going to build a set of stairs for my house. It starts with a little information, maybe a book, I know I will surf the net and get the info. Why bother with spending the time looking on the internet for a article or book on how to build stairs. I have done it and that's why I wrote a book and their are more books coming on how to build stairs.


My goal is to write a book on every way of building stairs. I am going to make the stair building books easy to follow with lots of simple illustrations. I understand that getting one book on stair building that explains how to build 500 different types of stairs with 3000 illustrations might not apply to you. These books are nice for a building professional or a master carpenter but are difficult to understand.


I have made these books easy to follow with the use of illustrations that only apply to the set of stairs you will be building. The book "How to Build a Strait Set of Stairs" is a complete stair building guide for a strait set of stairs with a 2 x 4 handrail. In this book you will have access to formulas for decimal conversions to fractions. Then you will be able to locate the exact mark for certain measurements. It isn't hard to build a straight set of stairs with this book and the website links provided for you.


If you feel comfortable with a hammer, tape measure and a circular saw. You will be amazed with the results. I have been helping people build stairs for almost 30 years with this easy to follow stair building system. I have trained other carpenters to build stairs with most of them telling me the same thing. How easy it was to build but they thought you had to be a master carpenter in order to build a set of stairs. The main reason for this way of thinking was that when it was time to build the stairs on the job guess who would build the stairs. The Master Carpenter of course.


You can do it with a little help from a friend. www.stair4u.com Get some help from the best home improvement contractor in California.


Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more building stairs books and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.


Article Source: http://EzineArticles.com/?expert=Greg_Vandenberge

Thursday, 13 November 2008

Installing a Stair Lift to Increase Safety

Walking up and down the stairs is something that is difficult for many individuals who are over 65 or suffer from medical conditions that effect their mobility. Not only is climbing the stairs difficult, but it is also dangerous, so many people choose to install a stair lift.


A fall down the stairs can be devastating and is the leading cause of hospitalization and accidental death among people over 65 For this reason, many avoid the stairs or rely on friends and family to help them. In some cases the inability to safely use the stairs might seem cause for a dramatic life change, such as a move, but none of this is necessary if you choose to install a stair lift, which are also often called stair chairs.


A stair chair gets its name, because a person is able to move up and down the stairs in a chair. A track is secured to the stairs and an electric motor then moves the chair along the track. Depending on the type of lift, some are capable of supporting over 500 pounds. These models are considered heavy duty stair chairs and also feature seats that are wider and reinforced. Most non-heavy duty lifts support around 350 pounds.


Individuals who have straight stairways are usually able to install a stair lift for much less than the cost of a residential elevator. In these cases, the stairway lift can also be installed without any major home renovation and often in less than a week. Several do-it-yourself kits are available that can be installed in only a few hours. If you don't feel comfortable or qualified to do the installation, you can have the lift professionally installed as well, which still costs considerably less than an elevator.


Those that have a straight stairway or one that is 'L' shaped and has a 90 degree bend, can usually install a straight stair chair with little difficulty, but those with curved steps are not so lucky. A curved lift will have to be custom built and professionally installed. Usually the cost is at least a hundred times more than a regular stair chair. The curved lift also will only work for the staircase it was designed, which greatly limits the resale value. In this case, a residential elevator is a good option.


Unlike the curved lift, the elevator will recoup much of its initial cost when the house is sold. Several quality residential elevator kits are available that can easily be retro-fitted into a home. They can be installed into wooden frames, without the necessity of having a brick or concrete elevator shaft. A vertical space between floors is necessary, but often times a hallway closet provides the perfect space. Since the cost and time it takes to build and install a curved lift and an elevator are relatively the same, the elevator is almost always the favorable choice.


Using a stair chair or an elevator is an excellent way to decrease the risk of a fall. In many instances they can be easily installed for a very affordable rate, without requiring excessive home construction.


Sam, a writer, is knowledgeable about many different types of mobility aids including stair lifts, which are a great way to increase safety on the stairs. Whether you have need of curved stair lifts or one for a straight staircase, visit the Stair Lift Guide to learn about these mobility aids.


Article Source: http://EzineArticles.com/?expert=Samuel_Tarwell

Saturday, 25 October 2008

Shaping Your Lower Body Using Stair Climbers

Stair climbers have long been a mainstay piece of equipment in many home fitness centers. They are considered to be the third most popular choice in home exercise equipment that is available today.


Stair steppers are simple to use since they simulate the beneficial action of climbing up stairs. Of course, with real stairs you are done when you reach the top, but with this fitness equipment you can continue climbing as long as your legs endure.


One of the reasons that stair climbers are so popular is that they are very effective at strengthening and building the muscles in your legs, thighs and buttocks. These large muscles are responsible for a great deal of overall body strength and are also responsible for a large percentage of the calories that you burn each day. Once you build up this group of large muscles, the effects on your metabolism will be significant because a faster metabolic rate equals more calories burned.


There are many people who have the mistaken idea that the only time their body benefits from an exercise is while it is being done. But, the experts say this is not so and that once you increase your muscle mass you will also increase the amount of fat being burned. This is one of the reasons stair climbers are popular, because they are one of the best fitness machines for helping you build the large muscles of your lower body.


As wonderful as they are, it is important to use them correctly, or you can end up wasting your time and not getting the benefits you desire. With proper exercise on a stair climber, meaning correct posture and not leaning your body weight on the rails of the machine, you can reap the maximum amount of gain. Not only will a stair climber help to build and tone your lower body, but the result of using it will improve your level of energy and your sense of balance as well.


There are a number of different kinds of them on the market from which to choose. Some of the available styles include: cylinder-driven climbers, wind-driven climbers and computer controlled climber models which can include some very sophisticated programming to challenge those who have been using stair climbing equipment for some time.


Stair climbers also come in quite a wide range of prices too. The most expensive stair steppers on the market include small onboard computers that will calculate the number of calories that you burn during a workout session.


They can also track your heart rate and can keep a record of the total number of feet or stories that you climbed during your routine. Additionally, some models come with workout handles which allow you to add exercises for the upper body.


Many experts suggest that stair climbers are more suitable for some people than exercise bikes, treadmills or other at home fitness equipment. However, if you have been sedentary, a stair climber may not be the best piece of home gym exercise equipment to start out with and you should consult your physician first. It should be noted that stair steppers are not recommended to be used by people who have cardiovascular or orthopedic disorders.


Because they are so effective at targeting and building those large muscles groups in your hips, legs and thighs, stair climbers are generally considered to be a more effective choice than treadmills and ellipticals. A good stair climber can be the main part of your home fitness center and because you can also watch TV, listen to music or read at the same time, you are more likely to use it regularly.


A whole world of information about stair climbers eagerly awaits you from Mike Selvon portal. We appreciate your feedback at our home gym fitness equipment blog.


Article Source: http://EzineArticles.com/?expert=Mike_Selvon

Monday, 15 September 2008

Stair Climbers - A Nice Addition to Any Home Gym

What you will find is the opinion of most trainers is that Stair climbers are excellent for toning and shaping muscles like the glutes and hamstrings but that that's about all they can do for you. There are a few Different kinds of stair climbers that are available for sale, some are cylinder-driven, wind-driven and computer-controlled models.


Other Cardiovascular Fitness Equipment that you may want to check out before you buy one of these are exercise bikes, treadmills and elliptical machines.


Stair climbers are pretty popular among home gym enthusiast and most people who have invested heavily into a home gym setup will have one sitting around. What I have found though is people tend to not use them as much as other equipment if they are available.


Active stair climbers are somewhat more fit and have a considerably bigger aerobic capacity. There is a strong association between stair climbing and bone density in post-menopausal women so if that's your case, one of these could help you have stronger bones in your later years.


These machines are also said to improve the amount of "good cholesterol" in the blood.


Stair climbing definitely increases leg power, with machine or not and can be a very high priority element in helping one reduce the risk of a heart attack later in life if you do it regularly but without abuse. Stair climbing can also very likely aid anyone to build and sustain healthy bones, muscles and joints.


Residential Stair Climbers are a very convenient and easy form to increase your cardiovascular workout without having to step out of the house. A lot of younger folks like these machines for the fame in helping out the muscles in the legs, thighs and buttocks.


Some nice steppers for very good prices can be found online or on ebay auctions.
Ebay is a nice place to buy because you can find systems way below the asking price in most stores.


Of all the ones I have used in gyms before, the Health Rider was the one I thought I'd get for my home when I build my home gym. There are many options available though so make sure to do your home work when buying one.


Tuesday, 19 August 2008

Vertical Platform Lifts: The Safe Stair Elevator

For those in a wheelchair one of the most difficult things to do can be to enter and exit our home. Often times the front stairs are much steeper and narrower than the inside steps and this can make it harder or impractical to build a ramp to enter your home. For others it puts too much strain on the body to use a ramp. There is a solution and that solution is vertical platform lifts.


Vertical platform lifts are often referred to as wheelchair lifts. They are in essence an elevator, usually installed outdoors, that raises the individual on a small reinforced steel platform. Most residential units utilize an electric motor to lift the unit using a very efficient gear system called a worm gear. Usually very little maintenance is required, but it is important to follow the instructions provided by the manufacturer.


Vertical platform lifts are generally designed to be permanent fixtures in that they should be bolted to a sturdy base made out of concrete or lumber. There are some exceptions to this however. Some units are available that are portable and can be moved very easily and require little installation or setup. The unit is on wheels, but can be securely bolted to a base if they are not going to be moved or depending on the lifting height. These types of units are great for churches, schools, and restaurants.


With certain units it is possible to create a temporary base. This is ideal if you need to quickly set up your new vertical platform lift or if you are about to move to a new home and do not want to install your new vertical platform lift twice. It is imperative that you consult your manufacturer’s installation instructions to see if your unit is compatible with this type of installation, but a temporary installation can be done on certain units by burying two pieces of rough cut lumber in 2 inches of sand or gravel so that the top of the boards are level with the ground. The distances and measurements of the boards will be provided by your manufacturer if this type of installation is possible with your vertical platform lift. Most units should also be secured to the side of the stairs or house if they are lifting a distance greater than 52 inches.


Whether you are purchasing a new vertical platform lift for your self or for a friend or family member it is imperative that you honestly access the expected weight load. If you are going to be using the wheel chair lift with two people than access the max weight that of the heaviest people that could be on the lift at any given time as well as the weight of the wheelchair. Generally most lifts will support at least 500lbs and it is possible to upgrade the lifts so that they hold more weight.


A vertical platform lift is a great investment and can let you establish a normal everyday routine.


Published At: www.Isnare.com
Permanent Link: http://www.isnare.com/?aid=236057&ca=Medicines+and+Remedies

Monday, 18 August 2008

How To Lose Unwanted Weight With Stair-Sprinting Exercises

You can lose weight if you really wanted to. You just need to make a commitment to yourself to eat less and exercise more. Most people think that exercising will take up a lot of their time because they always think in terms of going to the gym and burning 2-3 hours while trying to burn some calories.


But it does not have to be like that.


You don't have to go to the gym on a regular basis to lose weight. Really? Well, provided you think out of the box and do some aerobic type exercises near your home - like sprinting up your stairs!


Stair Sprints are perfect for sculpting the legs and back. If you're looking to build a shapely bum and strong thighs, then you should really try this exercise. The muscles in your feet also get a good workout from this and gain more endurance.


On top of that, you get an excellent aerobic workout without wasting precious time travelling to the gym and back.


Here's how to do this simple yet effective and time saving exercise the right way:-


1) Find a save and airy stair case to start your exercises.

2) Run up and down the flights of stairs between several floors; the more stairs you cover, the better your workout will be.

3) Start small, even if you’re in a good physical condition. Do four floors twice up and down. If you're very overweight or are doing it for the first time, this will do for starters.

4) Give yourself time to build up to two repetitions. Try to do two repetitions every other day for two weeks.

5) After the first two weeks, increase to three or four repetitions. Don't push yourself too hard though. If you can’t do four at first, then do three. Then, as time passes, you should gradually increase the repetitions in your routine. This is how you can increase your endurance and to work your muscles progressively harder.


Just a word of caution : be real careful going up and down the stairs. You don't want to trip up or miss a step and end up spraining your ankle or get other serious injuries.


Most of all, do this in moderation until you get the hang of it. It is no doubt one of the best exercises you can get for free!


Published At: www.Isnare.com
Permanent Link: http://www.isnare.com/?aid=156671&ca=Wellness%2C+Fitness+and+Diet

Monday, 4 August 2008

Stair Lift Advantages and More

In the United States and the world as a whole, there are countless people who have discovered the great safety benefits that are received by using a stair lift. A fall down the stairs, especially for people who are over the age of 65, often results in injury or even death. There is no need to take this risk, so if you or someone you care about is unsteady on the stairs, you should invest in a stair lift.


Stair lifts are a common type of personal lifting aid that can be installed on most types of stair cases. Those with curved stair cases are at a great disadvantage, because a curved stair lift will take several months to build and install and are also very expensive. A stair lift for a straight staircase on the other hand is not terribly expensive and can easily be installed by most people. Even if you do not feel comfortable doing the installation on your own, paying a professional stair lift installer is still very affordable.


To install a stair lift on a straight staircase it is important to get complete measurements of the stairs. The total length of the stairs will need to be measured and you will also need to measure the dimensions of an individual step on the stairs. You also need to measure how far the top of the stairs is to the nearest obstruction, like a wall or doorway, and will also need this measurement for the bottom of the steps. It is a good idea to have someone help you with the measurements as it is tremendously easier with two individuals. Your stair lift dealer will be able to help you with theses measurements as well and likely has a measurement team who can come to your home if you do not feel comfortable doing it.


In most cases the stair lift will be installed directly to the steps and a track will span the complete distance of the staircase. In instances where the staircase is very narrow, there are several low profile stair lifts available and they can also be attached to the wall. The track will be cut to fit your individual staircase, which is one reason that the measurements are so important.


Attached to the track is a car unit that is sent up and down the staircase. The car unit consists of an electrical motor and a chair. The user will simply sit in the chair and use the attached remote, wireless remote, or call buttons to start the unit moving. A quality stair lift will require constant pressure on the button, which is an important safety feature. A well made and dependable stair lift will also have built in safety sensors that checks for obstacles on the stairs.


A quality stair lift, like the AmeriGlide Batter Powered Stair Lift, will provide many years of dependable service and will be covered by a very substantial warranty. They greatly reduce the dangers associated with falling down the stairs and can also be affixed with baskets to help carry personal goods up the stairs.


Sean Noughtly, a technical writer, has experience with all types of stair lifts, such as the AmeriGlide Ultra Stair Lifts, and many other personal lifting aids. To learn more about AmeriGlide Stair Lifts visit or call the friendly folks at AmeriGlide today.


Article Source: http://EzineArticles.com/?expert=Sean_Noughtly

Tuesday, 29 July 2008

Acorn Stair Lifts

A stair lift is a device that can help people who are either disabled or elderly to go up and down the stairs in their own homes. There are plenty of different companies who now build stair lifts including Acorn Stair Lifts and each model that they produce will be able to cater to a person’s specific needs and requirements. Most types of stair lifts you see today have been specifically designed for use within the home, but there are some which a person can use for outdoors as well.


Certainly by having some form of stair lift in their home a disabled or elderly person will be able to maintain some sort of independence in their life. But each one of the stair lifts produced by either Acorn or other manufacturers of these devices will allow that person to travel safely and easily up and down the stairs in their home.


Acorn Stair Lifts since their formation have manufactured and installed many hundreds of thousands of stair lifts into people’s homes around the globe. By installing these within a person’s home Acorn have been able to ensure that these people can continue to live in the comfort of their own homes until such time as they feel that they are unable to.


Certainly as we get older and if you suffer from any form of disability (no matter how minor) it can be extremely difficult for you to get up and down stairs comfortably and safely. For many as we grow older or suffer from some kind of disability mobility is a problem and climbing up and down stairs can be a very big challenge as well as a big risk involved. Therefore these people will often turn to having a stair lift installed to help reduce the difficulties that they face of gaining access to the upper levels of their home.


All the Acorn Stair Lifts available today to purchase are powered by batteries and so there are no messy cables to worry about as everything is contained within a box that is built onto the chair. Plus many people who have already had one of these stair lifts installed in their homes have found the ride to be extremely smooth especially when the device is stopping and starting. Plus should there be a power cut in your home at any stage then you will know that your stair lift is going to still be able to get you up and down the stairs in your home.


Ricky runs a stair lift information site. Visit his website today for more information on straight stair lift and handicap stair lift.


Article Source: http://EzineArticles.com/?expert=Ricky_Lim