Poor Deck and Stair Construction Can Kill

In a recent article published in The Los Angeles Times, July 6th of this year, a tragic deck collapse resulting in serious injury and death, is reported. The deck was part of a three story apartment complex in a Birmingham suburb. Seven party-goers is all it took to create this tragic event. Unfortunately, this is an all to common occurrence now days. Reports are continually surfacing, confirming the growing frequency of these serious, life threatening collapses.

Over the past several years, much has been done to address deck and stair safety issues, but we still have a long way to go. One glaring example of the failure in deck and stair safety protocol is the industry standard of permitting "hot dipped galvanized" anchors, screws, hangers and other hardware to be in direct contact with ACQ, pressure treated wood. The galvanic corrosion created between the high copper content of the wood and the galvanizing is so severe that the normal industry standard of G90 galvanizing will corrode in as little as 12 months and G185, such as Z-Max® can be gone in 24 months. The industry (including code officials) has adopted G185 as a fall back position with no engineering testing available to substantiate the validity or longevity of this adoption...this is a "knee jerk" reaction and is an accident waiting to happen. Without a barrier between the pressure treated wood and galvanized hardware, serious corrosion is inevitable.

Take for example the new NADRA (North American Deck and Railing Association) study that examined the number of injuries caused by outdoor deck stairs and porches from 2003 to 2007. The report confirms that deck and stair injuries are on the increase. NADRA points to a 2003 study showing a total of 37,760 injuries which required a visit to the hospital. Of these injuries, 6,120 were a result of structural failure or collapse. Further, the report shows that by 2007, the incidents of serious injury had risen to 55,160. Quoting from the report- "Nearly 15% of all injuries are a result of structural failure". Wood decks are constantly exposed to the elements and they have a limited life span of 10-15 years. As you can see, important to have your deck and deck stairs inspected so that signs of wood decay and deterioration can be repaired.

Other codes address "rail post support" safety. A rail post per code regulations is required to support a lateral load of 200 lbs. This is a poorly enforced area of the code and with many inspectors content with the bump test. If it doesn't move too much when they bump it with their hip, the rail will pass inspection. Many rail posts are simply lagged or nailed to the rim joists and post which are mounted directly to the deck surface will simply not meet code. The tragedy is, there are systems available on the market that correctly address this problem. Simpson, USP and Deck-Loc have brackets which will meet code for rim joist attachment but there's only one adjustable bracket system (discussed below) which will meet code for wood or composite stairs.

Attention is now being given to the ability of the vertical post's strength when hit by various degrees of lateral thrust pressure. These new directives, requiring the vertical rail post to support a minimum of 200 lbs. of lateral thrust, is making engineered stair systems extremely popular, with their ability to withstand over 500 lbs of lateral thrust for the 'rail post support' structural sections of the overall decking plans.

Stairs are perhaps the most overlooked area of construction. Stairs using standard cut stringers have been used for eons and are "grandfathered" into code as accepted construction. Stringers are cut from 2x12's and greatly weakened in the process. Several stringers are then run longitudinal down length of the stair to make up for the strength loss during cutting. Long stair run tend to bounce and stringer failure is not uncommon. Additionally, many of these stairs are built without risers which is a "child safety" issue in many states. General Contractor and renowned professional deck builder, Pat Noonan of Minnesota says, "Of the 50+ decks I have torn off and replaced, not one had a stair system that outlasted the deck." The majority of them had shaky, unsafe stairs, and it was the main reason they were doing the rest of the deck."

Engineered stair systems such as adjustable bracket systems for wood stair and composite stairs overcome many of these problems and safety issues. This is due to the much more rigorous testing required to gain ICC/ES acceptance for a stair system which has not been simply "grand fathered" into common use. This adjustable bracket system is engineered in a completely different manner to conventional stair construction. These adjustable steel brackets lock the risers and treads onto the stringers, with a solid, joist hanger type connection. Only two stringers are required for stairs up to 7' in width. This becomes possible because the two outside stringers are full depth, acting like beams running down the length of the stair ( only three end are cuts required per stringer). Next, the risers (which are locked to the steel brackets) span across the stair like joist hangers, at each step supporting the tread.

The result is a "rock solid" stair which has been tested at over 1,200 lbs. per sq. ft.(uniform distributed load), well in excess of the code requirement of only 100 lbs per sq. ft. (commercial load). The steel brackets adjust to form any rise or run required and are powder coated over a hot dipped galvanized finish. The powder coating (paint) sets up an effective barrier between the pressure treated wood and the galvanized finish, preventing corrosion. Additionally the structural risers overcome the child safety issue (found on stairs without risers) and as mentioned above, the brackets have been tested to exceed code requirements for lateral load applied to "rail post" supports.

General Contractor Pat Noonan continues, "Craftsmanship will only take you so far when you are dealing with a inferior framing system and components. When deck builders notch steps out of a 2"x12", they are cutting all the strength out of the wood and putting the entire weight of the stair plus anyone walking up or down on 4" of wood left in the 2"x12". With an adjustable bracket system, they are putting the weight on 11' of solid wood- there's no comparison".

EZ Stairs adjustable bracket stair system allows builders to construct stairs with a wide range of materials such as redwood, cedar, tropical wood, treated wood, untreated wood, vinyl, steel, and composites. This stair system allows for customized rise and treads configurations which can be adjusted to meet all building codes for any interior or exterior application- ICC approved. It is the only adjustable stair bracket system available anywhere. The EZ Stairs system will allow you to build strong, easy to install stairs, in less time and with less money than traditional construction. You will have stairs that will last for many years longer than conventional stair construction.To help you figure out how many stairs you will need, the website provides a free stair calculator.

Tag : stair lifts,stair desigh,stair railing

Article Source: http://EzineArticles.com/?expert=Richard_Truckner

Why Stair Railings are Not Just Functional

If you look upon the stair railings in your home as simply something to hold on to as you go from one level to another, you are missing a lot. Stair railings can add a lot to the look of a home and reflect your personal taste in decorating. Stair railings made of wood, metal or other materials are available that are easy to install and will add a great deal of value to your home. Don't forget that the stair railing is the first thing people see when they enter your home. If you are going to install a new stair railing in your home, seek the advice of a professional who can advise you as to the best choices in materials, design and types of construction.

For a choice that will always be in style, wood stair railings are usually the way to go. Wood stair railings are classic and have been used for many years and are still popular today, even with the choice of other materials that are available. There are unique designs available in wood and wood is one of the easiest materials to work with. Oak railings, for example, have a lovely reddish tinge and visible knots that add to the character of the railing. A beautiful oak wood balustrade overlooking a room will truly be memorable. Matching the color of the railing to the floor will lend a smooth, unbroken line to the area, but sometimes that may not be easy to do, Trying to match the all of the wood aspects of a room, such as the flooring, stairs, handrails, trim and balustrade is not an easy task. The most visible and noticeable part of a railing is the handrail, and it is also the part with the most important function: to steady people and to hold up the balustrade. These are important elements to consider in the design of the stair railing. The soft glow of wood railings offer charm and grace to a home and add a finishing touch to the beauty of the home while, of course, adding to the value. Strong, durable wood is a material for stair railings that will never go out of style. Traditional buildings, such as libraries, office buildings or houses and commercial edifices built in the traditional style usually have oak wood railings. It is preferred because it adds elegance and warmth to whatever area it is in.

Today, many people opt for metal railings, and this style goes well with certain decorating, especially since there are so many styles with decorative options to choose from. You will find metal railings in many luxury residences because of the elegance they can add to a home. They are especially prevalent in commercial spaces since they offer the same design and safety features as wood, but can be much more functional. The almost limitless design features available in metal railings make them right for almost any environment. Metal railings, of course, have to be installed by a specialist in that material. Make sure you hire a craftman who works in metal, because this in not an easy material to work with.

An expert will be necessary for any stair railings you want, because of the important steps that have to be considered in building a rail; the safety of a railing is paramount. The height of the stairway, the proper number of steps and the height of the rise are all very critical to both the safety and beauty of the stair. With the proper guidance of an expert, you can use your imagination and creativity in designing a beautiful staircase, especially since you have today's modern assortment of designs to choose from. Just let your inner artist guide the way.

Andrew Caxton is the author and editor of many resources published at http://www.home-decorating-reviews.com. If you would like more information on this topic please checkout his website, read his article about stair railings, and subscribe to his successful e-newsletter, published regularly

Article Source: http://EzineArticles.com/?expert=Andrew_Caxton

All About Stair Railings

Discusses different materials and styles of stair railings. How different decorating styles affect your choice of railings. Cautions to use i in installing stair railings.

If you look upon the stair railings in your home as simply something to hold on to as you go from one level to another, you are missing a lot. Stair railings can add a lot to the look of a home and reflect your personal taste in decorating. Stair railings made of wood, metal or other materials are available that are easy to install and will add a great deal of value to your home. Don't forget that the stair railing is the first thing people see when they enter your home. If you are going to install a new stair railing in your home, seek the advice of a professional who can advise you as to the best choices in materials, design and types of construction.

For a choice that will always be in style, woodstair railings are usually the way to go. Wood stair railings are classic and have been used for many years and are still popular today, even with the choice of other materials that are available. There are unique designs available in wood and wood is one of the easiest materials to work with. Oak railings, for example, have a lovely reddish tinge and visible knots that add to the character of the railing. A beautiful oak wood balustrade overlooking a room will truly be memorable. Matching the color of the railing to the floor will lend a smooth, unbroken line to the area, but sometimes that may not be easy to do, Trying to match the all of the wood aspects of a room, such as the flooring, stairs, handrails, trim and balustrade is not an easy task. The most visible and noticeable part of a railing is the handrail, and it is also the part with the most important function: to steady people and to hold up the balustrade. These are important elements to consider in the design of the stair railing. The soft glow of wood railings offer charm and grace to a home and add a finishing touch to the beauty of the home while, of course, adding to the value. Stong, durable wood is a material for stair railings that will never go out of style. Traditional builidings, such as libraries, office buildings or houses and commercial edifices built in the traditional style usually have oak wood railings. It is preferred because it adds elegance and warmth to whatever area it is in.

Today, many people opt for metal railings, and this style goes well with certain decorating, especially since there are so many styles with decorative options to choose from. You will find metal railings in many luxury residences because of the elegance they can add to a home. They are especially prevalent in commercial spaces since they offer the same design and safety features as wood, but can be much more functional. The almost limitless design features available in metal railings make them right for almost any environment. Metal railings, of course, have to be installed by a specialist in that material. Make sure you hire a craftman who works in metal, because this in not an easy material to work with.

An expert will be necessary for any stair railings you want, because of the important steps that have to be considered in buliding a rail; the safety of a railing is paramount. The height of the stairway, the proper number of steps and the height of the rise are all very critical to both the safety and beauty of the stair. With the proper guidance of an expert, you can use your imagination and creativity in designing a beautiful staircase, especially since you have today's modern assortment of designs to choose from. Just let your inner artist guide the way.

Published At: www.Isnare.com
Permanent Link: http://www.isnare.com/?aid=105013&ca=Home+Management

Iron Front Porch Stair Railings Are Another Material To Consider

If you have stairs on the front of your home, then you know the importance of a sturdy and aesthetically pleasing front porch stair railing. There are so many different styles and designs of front porch stair railings, which allow the homeowner to find the railings that fit the style of their home. You will find that the materials in front porch stair railings vary greatly as well. Learning more about the materials available in front porch stair railings will enable you to find the material that will work best for your needs and your home.

Two materials which work great for front porch stair railings are vinyl and PVC. These materials are wonderful because they do not splinter, they are smooth to the touch, and they are slip-resistance for maximum safety. These materials are also extremely durable, hold up well to weather exposure, and they will not burn your hands during the summer because they do not hold heat like some materials. PVC is resistant to UV light, which will help prevent fading or other color changes due to sun exposure. Both vinyl and PVC come in many different colors and vinyl even comes in wood grain design if you want the look of wood, but the durability and ease of use of vinyl.

Wood front porch stair railings are another option that you may want to consider. Wood is a traditional material for homes that give character like nothing else. There are so many different varieties and species of wood that you can use to make your front porch stair railings. Cedar wood is a wonderful choice, because it offers you decay resistance, as well as being insect resistant. Cedar will also handle moisture much better than other wood species. You will find that there are other wood options that you may want to consider as well, including composite woods. Composite wood front porch stair railings will be durable, water resistant, and will need little maintenance. They are also decay, insect, and UV light resistance, which will help them to stay beautiful for many years. Composite wood does not splinter, either.

Iron front porch stair railings are another material to consider. Iron is widely used as a railing material due to its durability and strength. Iron offers you a beautiful way to help enhance your home. Iron is a wonderful material because it can be made in almost any design that you can think of-from animals to shapes to even letters. It is very durable and will probably outlast your home. You will love the classic look that iron can add to your front porch.

By choosing the right materials for you and your home, you will find that your front porch stair railings can be functional and enhance your home.

Published At: www.Isnare.com
Permanent Link: http://www.isnare.com/?aid=141967&ca=Home+Management

Why Installing a Stair Nosing on the Edge of Any Kind of Stair Step Edge Is a Must

The durability and the safe use of stairs have always been a concern for architects and constructors.

The stair nosing has been around since the early 20th century.

For instance if you visit the gorgeous Plaza de España in the historic city of Sevilla in Spain please pay attention to the step edges of the stairs that direct you to the upper floor from where you get a spectacular view of the palace's square. You will notice superb step edgings that most properly inspired today's stair nosing designers. This superb palace was constructed in the late 1920s.

There is no doubt that you will notice diverse step edgings in several old buildings with stone, ceramic, marble or parquet overlaid stairs.

The stair nosings that are installed on the step edge of ceramic tile, marble or wood covered stairs in contemporary buildings and particularly in public ones such as shopping malls, schools, governmental institutions are subject to heavy pedestrian traffic.

Installed on the edge of the ceramic or similar stair steps the aluminium stair nosing trim is designed to provide protection to the stone, marble or ceramic tile edge on the stairs by preventing chipping and fractures. The use of the stairs is safeguarded as stair steps may become hazardous particularly when wet or worn out.

A great deal of accidents occur going down on stairs when the proper attention is not paid. Many of these accidents may result in serious injuries.

Presently several models of aluminium stair nosings are suggested for the protection and secure use of the concrete, ceramic tile, marble, stone or wood covered stairs:

Stair nosings which are installed directly over the concrete stair step edge.

Tile-in stair nosings with or without replaceable pvc insert, designed to accommodate ceramic tiles in various thicknesses. These stair nosings may only be fitted during the tile, marble or stone installation process; as the bottom of the frontal edge of the nosing should get under the ceramic tile to ensure a firm grip.

The incorporated and durable ribbed PVC strips which come in a variety of colors (i.e. black, grey, brown or cream) achieve perfect compatibility with the ceramic tile colorations and furnish improved slip resistance.

Retro fit step edges, with or without replaceable vinyl insert that are fitted after tile, stone or marble installation.

There are no other major distinctions between the two stair nosings, both serve the same purposes. Worn out stair steps not only portray an unpleasant look, but on top of that the secure use of the stairs is endangered. As a consequence this form of anti skid stair nose is a perfect choice for upgrading and renovating existing stairs in poor condition and in need of repair. The worn out stair edges would be covered up and masked.

The grooves on the upper surface of the stair nosing will add an anti slip feature assuring the safe use the stairs. The utilization of non slip stair nosing is highly recommended to protect tiles on stairs from chipping and to prevent costly and unnecessary ceramic tile installation expenses afterwards.

An aluminum stair nosing fitted at the edge of the wooden stair would prove to be highly beneficial as well. The parquet and laminate flooring stair step edges will be protected from wear and the unsightly appearance of fractured and damaged stair step edges will be avoided. Subsequently damage to stair edges and its disagreeable appearance are averted as well as high-priced renovations.

Diverse stair tread nosing profiles that can withstand extensive influx secure the use of the wood stairs, and their anti-slip ribbed top surface and the grooves create slip resistance and enable the safe use of the stairs.

Slip and fall accident risks are reduced, injuries no longer become a concern and a decorative feature perfectly fitting the stairs is provided.

The retrofit stair tread nosing may be fitted with glue, adhesive tape or rather screwed to the tile, stone, parquet or similar flooring to allow a long lasting tight grip. When supplied predrilled and with countersink holes the installation with screws will turn out to be faster and smoother.

Tag : stair,stair nosing,installing,edge

Why Installing a Stair Nosing on the Edge of Any Kind of Stair Step Edge Is a Must

The durability and the safe use of stairs have always been a concern for architects and constructors.

The stair nosing has been around since the early 20th century.

For instance if you visit the gorgeous Plaza de España in the historic city of Sevilla in Spain please pay attention to the step edges of the stairs that direct you to the upper floor from where you get a spectacular view of the palace's square. You will notice superb step edgings that most properly inspired today's stair nosing designers. This superb palace was constructed in the late 1920s.

There is no doubt that you will notice diverse step edgings in several old buildings with stone, ceramic, marble or parquet overlaid stairs.

The stair nosings that are installed on the step edge of ceramic tile, marble or wood covered stairs in contemporary buildings and particularly in public ones such as shopping malls, schools, governmental institutions are subject to heavy pedestrian traffic.

Installed on the edge of the ceramic or similar stair steps the aluminium stair nosing trim is designed to provide protection to the stone, marble or ceramic tile edge on the stairs by preventing chipping and fractures. The use of the stairs is safeguarded as stair steps may become hazardous particularly when wet or worn out.

A great deal of accidents occur going down on stairs when the proper attention is not paid. Many of these accidents may result in serious injuries.

Presently several models of aluminium stair nosings are suggested for the protection and secure use of the concrete, ceramic tile, marble, stone or wood covered stairs:

Stair nosings which are installed directly over the concrete stair step edge.

Tile-in stair nosings with or without replaceable pvc insert, designed to accommodate ceramic tiles in various thicknesses. These stair nosings may only be fitted during the tile, marble or stone installation process; as the bottom of the frontal edge of the nosing should get under the ceramic tile to ensure a firm grip.

The incorporated and durable ribbed PVC strips which come in a variety of colors (i.e. black, grey, brown or cream) achieve perfect compatibility with the ceramic tile colorations and furnish improved slip resistance.

Retro fit step edges, with or without replaceable vinyl, insert that are fitted after tile, stone or marble installation.

There are no other major distinctions between the two stair nosings, both serve the same purposes. Worn out stair steps not only portray an unpleasant look, but on top of that the secure use of the stairs is endangered. As a consequence this form of anti skid stair nose is a perfect choice for upgrading and renovating existing stairs in poor condition and in need of repair. The worn out stair edges would be covered up and masked.

The grooves on the upper surface of the stair nosing will add an anti slip feature assuring the safe use the stairs. The utilization of non slip stair nosing is highly recommended to protect tiles on stairs from chipping and to prevent costly and unnecessary ceramic tile installation expenses afterwards.

An aluminum stair nosing fitted at the edge of the wooden stair would prove to be highly beneficial as well. The parquet and laminate flooring stair step edges will be protected from wear and the unsightly appearance of fractured and damaged stair step edges will be avoided. Subsequently damage to stair edges and its disagreeable appearance are averted as well as high-priced renovations.

Diverse stair tread nosing profiles that can withstand extensive influx secure the use of the wood stairs, and their anti-slip ribbed top surface and the grooves create slip resistance and enable the safe use of the stairs.

Slip and fall accident risks are reduced, injuries no longer become a concern and a decorative feature perfectly fitting the stairs is provided.

The retrofit stair tread nosing may be fitted with glue, adhesive tape or rather screwed to the tile, stone, parquet or similar flooring to allow a long lasting tight grip. When supplied predrilled and with countersink holes the installation with screws will turn out to be faster and smoother.

Article Source: http://EzineArticles.com/?expert=Zeki_Sevgi

Treading Carefully: Choose The Right Wood For Stair Treads

You’ve been going up and down those stairs in your house for years, so it’s tempting to think they’re just the same as they always were. But nothing lasts forever, not even the things we most take for granted. If you’re starting to hear creaks, or seeing cracks in the wood or discoloration, it might be time to change out the treads.

Not to be confused with tire treads, stair treads are the boards across the top of the stair that your feet steps on as you walk up or down. The vertical kick plates between stairs are known as risers, and the saw-tooth shaped pieces supporting the stairs from beneath are stringers. All these pieces need to be fitted tightly together to avoid creaking as the stairs are being used.

If it’s time to address some squeaks, cracks or other stair problems, it’s a great opportunity to increase their beauty as well. Hardwood stairs with a decorative runner can increase the graciousness of your home. Ranging in price to fit any budget, stair treads can be matched to any décor.

Economical Hardwood

• Poplar Stair Treads: Lightweight, and somewhat soft for a hardwood, poplar is fine-grained in white to yellow-brown. It paints well and is easy to cut.

• Beech Stair Treads: Stronger than oak or maple, beech is typically a reddish-brown wood that is fairly straight grained.

• Ash Stair Treads: Quite strong, ash is grayish-brown in color and grows all over USA and Canada.

• Red oak stair treads: Hard, strong, rigid with a pronounced open grain, red oak resists warping. Its reddish color finishes well but is moderately hard to cut.

• Hickory Stair Treads: Very strong, hickory is known for its distinctive look and sharp contrast in light and dark color.

Mid-priced Hardwood

• White Oak Stair Treads: Hard, strong, white oak is open-grained, but not as pronounced as red oak. It resists shrinking and warping, has a golden color, and finishes well.

• Hard Maple Stair Treads: Extremely hard, hard maple pieces with bird’s-eye or wavy grains are highly prized. Its color ranges from reddish to nearly white in color, and it finishes well.

• Cherry Stair Treads: The beautiful markings in cherry have long fascinated woodworkers. The heartwood varies from light brown to a reddish brown and will gradually darken over time with exposure to light.

• Walnut Stair Treads: Hard, heavy, extra strong with a fairly pronounced, straight grain, walnut resists warping and shrinking. It is light to dark brown in color and finishes well.

Luxury Hardwood

• Mahogany Stair Treads: Durable and fine-grained, mahogany resists shrinking, warping, and swelling. It finishes well and is easy to cut.

• Birch Stair Treads: Hard, strong and fine-grained, birch resists shrinking and warping. It is similar in color to maple and finishes fairly well.

Some other issues to consider in choosing your stair treads:

Diversity: If you want your home to have a unique flair, try hickory, cherry, walnut, white oak, or maple for your stair treads. Go to flooring retailers or search the Internet to compare and contrast.

Prefinished: Order your stair treads prefinished, and you won’t have to deal with having to stay away from the stairs for a few days while the finish seals. Factory finished pieces can generally be installed in one day with very little mess. Also, prefinished pieces can move independently with humidity changes in your home. This decreases the risk of seasonal separations that cause those creaks.

Color: Some species of flooring are so beautiful in their natural color, they do not require any added color. Compare hickory, cherry or walnut stair treads to get a sense of the possibilities.

Texture: Hardwoods do not have to be smooth. Hand scraped, distressed and reclaimed pieces are becoming more and more available. These pieces have a classic look and add great value to upscale homes.

Turn those irritating squeaks into an occasion for more beauty with restored stair treads. The “ups and downs” in your life will suddenly become a lot better!

Published At: www.Isnare.com

Permanent Link: http://www.isnare.com/?aid=58421&ca=Home+Management

Stair Railings Are Vinyl and PVC

Two materials which work great for front porch stair railings are vinyl and PVC. These materials are wonderful because they do not splinter, they are smooth to the touch, and they are slip-resistance for maximum safety. These materials are also extremely durable, hold up well to weather exposure, and they will not burn your hands during the summer because they do not hold heat like some materials. PVC is resistant to UV light, which will help prevent fading or other color changes due to sun exposure. Both vinyl and PVC come in many different colors and vinyl even comes in wood grain design if you want the look of wood, but the durability and ease of use of vinyl.

Wood front porch stair railings are another option that you may want to consider. Wood is a traditional material for homes that give character like nothing else. There are so many different varieties and species of wood that you can use to make your front porch stair railings. Cedar wood is a wonderful choice, because it offers you decay resistance, as well as being insect resistant. Cedar will also handle moisture much better than other wood species. You will find that there are other wood options that you may want to consider as well, including composite woods. Composite wood front porch stair railings will be durable, water resistant, and will need little maintenance. They are also decay, insect, and UV light resistance, which will help them to stay beautiful for many years. Composite wood does not splinter, either.

Iron front porch stair railings are another material to consider. Iron is widely used as a railing material due to its durability and strength. Iron offers you a beautiful way to help enhance your home. Iron is a wonderful material because it can be made in almost any design that you can think of-from animals to shapes to even letters. It is very durable and will probably outlast your home. You will love the classic look that iron can add to your front porch.

By choosing the right materials for you and your home, you will find that your front porch stair railings can be functional and enhance your home.

Andrew Caxton is the author of many articles on different web publications, with subjects like railing designs published online for http://www.deck-porch-railings.com . A website with tips on vinyl railings.

Article Source: http://EzineArticles.com/?expert=Andrew_Caxton

Building Deck Stairs on a Budget

As a professional, I've built many decks of all sizes and shapes. Stairs are often the last part of the deck to be tackled because they are usually the most difficult and expensive part of the deck to build. However, by using a method known as the 'engineered bracket system', not only can I save up to $500 per flight of stairs, but the installation is easy, with professional results.

The adjustable stair bracket system automatically adjusts to the exact rise and run needed. The customized rise and treads configurations can be adjusted to meet all building codes for any interior or exterior application. The brackets act as joist hangers which allow the stair risers to be used structurally, carrying the load across the stair like floor joists. Using only two outside stringers, the stair width can be up to nine feet wide and the stairs are strong. The need for interior stringers is eliminated. The outside stringers then require only 3 to 4 cuts each, and the risers and treads are simply attached to the brackets. If you make a mistake, you can readjust the brackets.

A wide range of materials such as redwood, cedar, tropical wood, treated wood, untreated wood, vinyl, steel, and composites can be used. Adjustable brackets allow for customized rise and tread configurations which can be adjusted to meet all building codes for any interior or exterior application.

This is how it works: Set the brackets on the two 2x6 stringer members using the spacers and pivot screws. Remove spacers and rotate brackets to adjust stair height. Fix brackets in position, attach risers and treads. 3D video demos are available on the website below.

Before you begin, determine the material you are going to use, the exact number of steps you need and the stair width.

You will need (2) 2x6's per stringer for each side. Make sure when you purchase your 2x6's make sure that they are straight without any twist. The 2x6's will need to be at least 12" longer than the total length of your stairs. Two stringers are sufficient to span up to 7' wide (exterior stair requirements).

For risers you will use 2x8's for riser heights up to 7-1/4" and 2x10's for higher risers. For treads you can use 2x12's (which is the easiest option). However, if you decide to use (2) 6 inch wide treads instead...wood or composite, you will need to use cleat brackets to bridge between the risers for tread support. Time saving tip: when you determine how many steps you will need and your stair width....get all your risers and treads pre-cut to exact lengths when you purchase the materials.

Tools/Materials needed will be: a power drill, saw (skill saw is preferable, but not required, #8 1 1/4" Phillips flat head or star/square drive screws for the stair brackets, #8 2 1/2" deck screws for every 9" of tread and riser connection and Spacers for customized riser and tread measurements.

The "Engineered Stair Bracket System" method eliminates the need to cut stringers and is tested to be much stronger and faster than conventional construction. Whether you're a seasoned professional or a do-it-yourselfer, you will build fast, strong and accurate stairs, on a budget.

Tag : stair lifts,deck stairs,stair design,wood stair

Article Source: http://EzineArticles.com/?expert=Richard_Truckner

Fixings Squeaking Stairs in Older Homes

Oh yes the common problem of squeaking stairs in an older house. This could become very frustrating and annoying as you walk up and down the stairs. There seems to be one or two stair treads that are always squeaking. That annoying sound as you walk as softly as you can on your way down to the kitchen in the middle of the night to grab a quick snack.

The number one cause of squeaking stairs is when the nails used to fasten the stair tread to the stair strainers has worked its way loose. Over time as the lumber shrinks in the stair treads and the stairs stringers. You will start to develop a separation or a gap between the stair tread and the stair strainer.

The stair stringer can shrink as much as 3/8 of an inch in just a few years. I was building a home and went to measure the stair stringer that was 11 1/2 inches wide originally. Then I measured it after two months outside in the summer sun it now measured 11 1/16". I was amazed that the lumber could shrink that much in such a short period of time.

As the stair stringer shrinks it starts to pull away from the plywood or hardwood stair tread. As it starts to separate from the stair tread the nail will stay in its original position until the stair tread starts to put pressure on the nail eventually lifting it up a little bit higher than its original position.

As you step on the stair tread the squeaking sound you hear is the nail rubbing against the stair tread. There are a few ways to fix a squeaking stair tread. If you have access to under the stairway you can apply some adhesive along with a 10 inch 2 x 4 under the stair tread and attach it to the stair stringer.

First apply adhesive to two sides of the 2 x 4. The adhesive will be used to glue the stair tread to the stair stringer. You can use screws to screw the new 2 x 4 onto the side of the stair stringer.

If you cannot access the underside of the stairs and you have carpeting you can actually locate the stair stringer and drive a 2 inch screw through the carpeting in to the stair stringer. This will pull the stair tread down and will not allow it to rub up against the nail making that awful sound of a squeaking stair case.

If you have a finished wood stair tread you will not be able to screw through it into the stair stringer without damaging the finish on tread itself. It will be easier to access the stair stringer from below somehow and apply the 2 x 4 with the adhesive to stop the stair squeak.

You can apply these methods to as many stair treads that are squeaking without taking apart the entire staircase and rebuilding it.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more building stairs books and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Stair Building

Article Source: http://EzineArticles.com/?expert=Greg_Vandenberge

Fixings Squeaking Stairs in Older Homes

Oh yes the common problem of squeaking stairs in an older house. This could become very frustrating and annoying as you walk up and down the stairs. There seems to be one or two stair treads that are always squeaking. That annoying sound as you walk as softly as you can on your way down to the kitchen in the middle of the night to grab a quick snack.

The number one cause of squeaking stairs is when the nails used to fasten the stair tread to the stair strainers has worked its way loose. Over time as the lumber shrinks in the stair treads and the stairs stringers. You will start to develop a separation or a gap between the stair tread and the stair strainer.

The stair stringer can shrink as much as 3/8 of an inch in just a few years. I was building a home and went to measure the stair stringer that was 11 1/2 inches wide originally. Then I measured it after two months outside in the summer sun it now measured 11 1/16". I was amazed that the lumber could shrink that much in such a short period of time.

As the stair stringer shrinks it starts to pull away from the plywood or hardwood stair tread. As it starts to separate from the stair tread the nail will stay in its original position until the stair tread starts to put pressure on the nail eventually lifting it up a little bit higher than its original position.

As you step on the stair tread the squeaking sound you hear is the nail rubbing against the stair tread. There are a few ways to fix a squeaking stair tread. If you have access to under the stairway you can apply some adhesive along with a 10 inch 2 x 4 under the stair tread and attach it to the stair stringer.

First apply adhesive to two sides of the 2 x 4. The adhesive will be used to glue the stair tread to the stair stringer. You can use screws to screw the new 2 x 4 onto the side of the stair stringer.

If you cannot access the underside of the stairs and you have carpeting you can actually locate the stair stringer and drive a 2 inch screw through the carpeting in to the stair stringer. This will pull the stair tread down and will not allow it to rub up against the nail making that awful sound of a squeaking stair case.

If you have a finished wood stair tread you will not be able to screw through it into the stair stringer without damaging the finish on tread itself. It will be easier to access the stair stringer from below somehow and apply the 2 x 4 with the adhesive to stop the stair squeak.

You can apply these methods to as many stair treads that are squeaking without taking apart the entire staircase and rebuilding it.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more building stairs books and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Stair Building

Article Source: http://EzineArticles.com/?expert=Greg_Vandenberge

What to Look For When Buying a Stair Lift

Stair lifts are an imperative invention which has made the mobility of the old and the disabled possible. People who have some issues with their legs or who are completely handicapped can make use of the stair lifts. It can help them go up and down the stairs on their own and they no more have to wait for someone to lift them or support them to climb the stairs.

A stair lift is easy to install, and can be fixed at almost all stairways. However, if you wish to purchase a stair lift for yourself or a dear one, you need consider a few things.

When you plan to buy a stair lift, an agent from the stair lift company will have to visit your place. This is essential as to know the precise measurements of your staircase and evaluate your particular requirement. Once they have taken the measurements and noted your need, they can present you with a number of options of lifts for stair.

You should request for a written quotation before making any decision. This is important as stair lifts are not very cheap. You can also contact a number of stair lift suppliers so that you can have various options. Having a number of options will help you make the best deal in terms of cost as well as function. You can compare their prices and warrant etc.

If you think you cannot afford to buy a new stair lift, you can also find the option of used ones. However, you should remember that the used lifts for stair might not have any warranty. Instead of purchasing a second hand stair lift from a private supplier, it is preferable to purchase a reconditioned lifts for stair from a supplier who is well established. But in this case as well you must see the warranty.

One of the best things about lifts for stair is that they can be installed at any staircase regardless of the style, size, or shape. Most stair lifts are meant for indoor usage; however, you can also find some which can be used outdoor as well. You can find many different sorts of stair lifts which are meant for different purposes, and cater for the needs of people with diverse problems.

A common type of lift for stair is a standing stair lifts. These stair lifts are meant for those who can stand but cannot bend their joints to climb the stair. They can stand on these lifts for stair, and thus move up or down the stairs independently. The standing lifts for stair can also be installed in a limited space without any problem.

Another type of lifts for stair includes the seated stair lifts. Those who are completely handicapped and cannot move up or down the stairs at all normally use these. They have seats which run along the stairs. All you have to do it to sit on them, and you can move about. Some lifts for stair also come with the additional feature of fold able arms.

Tag : stair lifts,stair design,wood stair,stair gate Article Source: http://EzineArticles.com/?expert=Brinkmann_Hamer

Fixings Squeaking Stairs in Older Homes

Oh yes the common problem of squeaking stairs in an older house. This could become very frustrating and annoying as you walk up and down the stairs. There seems to be one or two stair treads that are always squeaking. That annoying sound as you walk as softly as you can on your way down to the kitchen in the middle of the night to grab a quick snack.

The number one cause of squeaking stairs is when the nails used to fasten the stair tread to the stair strainers has worked its way loose. Over time as the lumber shrinks in the stair treads and the stairs stringers. You will start to develop a separation or a gap between the stair tread and the stair strainer.

The stair stringer can shrink as much as 3/8 of an inch in just a few years. I was building a home and went to measure the stair stringer that was 11 1/2 inches wide originally. Then I measured it after two months outside in the summer sun it now measured 11 1/16". I was amazed that the lumber could shrink that much in such a short period of time.

As the stair stringer shrinks it starts to pull away from the plywood or hardwood stair tread. As it starts to separate from the stair tread the nail will stay in its original position until the stair tread starts to put pressure on the nail eventually lifting it up a little bit higher than its original position.

As you step on the stair tread the squeaking sound you hear is the nail rubbing against the stair tread. There are a few ways to fix a squeaking stair tread. If you have access to under the stairway you can apply some adhesive along with a 10 inch 2 x 4 under the stair tread and attach it to the stair stringer.

First apply adhesive to two sides of the 2 x 4. The adhesive will be used to glue the stair tread to the stair stringer. You can use screws to screw the new 2 x 4 onto the side of the stair stringer.

If you cannot access the underside of the stairs and you have carpeting you can actually locate the stair stringer and drive a 2 inch screw through the carpeting in to the stair stringer. This will pull the stair tread down and will not allow it to rub up against the nail making that awful sound of a squeaking stair case.

If you have a finished wood stair tread you will not be able to screw through it into the stair stringer without damaging the finish on tread itself. It will be easier to access the stair stringer from below somehow and apply the 2 x 4 with the adhesive to stop the stair squeak.

You can apply these methods to as many stair treads that are squeaking without taking apart the entire staircase and rebuilding it.

Fixings Squeaking Stairs in Older Homes

Oh yes the common problem of squeaking stairs in an older house. This could become very frustrating and annoying as you walk up and down the stairs. There seems to be one or two stair treads that are always squeaking. That annoying sound as you walk as softly as you can on your way down to the kitchen in the middle of the night to grab a quick snack.

The number one cause of squeaking stairs is when the nails used to fasten the stair tread to the stair strainers has worked its way loose. Over time as the lumber shrinks in the stair treads and the stairs stringers. You will start to develop a separation or a gap between the stair tread and the stair strainer.

The stair stringer can shrink as much as 3/8 of an inch in just a few years. I was building a home and went to measure the stair stringer that was 11 1/2 inches wide originally. Then I measured it after two months outside in the summer sun it now measured 11 1/16". I was amazed that the lumber could shrink that much in such a short period of time.

As the stair stringer shrinks it starts to pull away from the plywood or hardwood stair tread. As it starts to separate from the stair tread the nail will stay in its original position until the stair tread starts to put pressure on the nail eventually lifting it up a little bit higher than its original position.

As you step on the stair tread the squeaking sound you hear is the nail rubbing against the stair tread. There are a few ways to fix a squeaking stair tread. If you have access to under the stairway you can apply some adhesive along with a 10 inch 2 x 4 under the stair tread and attach it to the stair stringer.

First apply adhesive to two sides of the 2 x 4. The adhesive will be used to glue the stair tread to the stair stringer. You can use screws to screw the new 2 x 4 onto the side of the stair stringer.

If you cannot access the underside of the stairs and you have carpeting you can actually locate the stair stringer and drive a 2 inch screw through the carpeting in to the stair stringer. This will pull the stair tread down and will not allow it to rub up against the nail making that awful sound of a squeaking stair case.

If you have a finished wood stair tread you will not be able to screw through it into the stair stringer without damaging the finish on tread itself. It will be easier to access the stair stringer from below somehow and apply the 2 x 4 with the adhesive to stop the stair squeak.

You can apply these methods to as many stair treads that are squeaking without taking apart the entire staircase and rebuilding it.

Article Source: http://EzineArticles.com/?expert=Greg_Vandenberge

Building Deck Stairs on a Budget - By Richard Truckner / Leslie ...

As a professional, I’ve built many decks of all sizes and shapes. Stairs are often the last part of the deck to be tackled because they are usually the most difficult and expensive part of the deck to build. However, by using a method known as the ‘engineered bracket system’, not only can I save up to $500 per flight of wood stairs, but the installation is easy, with professional results.

The adjustable stair bracket system automatically adjusts to the exact rise and run needed. The customized rise and treads configurations can be adjusted to meet all building codes for any interior or exterior application. The brackets act as joist hangers which allow the stair risers to be used structurally, carrying the load across the stair like floor joists. Using only two outside stringers, the stair width can be up to nine feet wide and the stairs are strong. The need for interior stringers is eliminated. The outside stringers then require only 3 to 4 cuts each, and the risers and treads are simply attached to the brackets. If you make a mistake, you can readjust the brackets.

A wide range of materials such as redwood, cedar, tropical wood, treated wood, untreated wood, vinyl, steel, and composites can be used. Adjustable brackets allow for customized rise and tread configurations which can be adjusted to meet all building codes for any interior or exterior application.

This is how it works: Set the brackets on the two 2×6 stringer members using the spacers and pivot screws. Remove spacers and rotate brackets to adjust stair height. Fix brackets in position, attach risers and treads. 3D video demos are available on the website below.

Before you begin, determine the material you are going to use, the exact number of steps you need and the stair width.

You will need (2) 2×6’s per stringer for each side. Make sure when you purchase your 2×6’s make sure that they are straight without any twist. The 2×6’s will need to be at least 12″ longer than the total length of your stairs. Two stringers are sufficient to span up to 7′ wide (exterior stair requirements).

For risers you will use 2×8’s for riser heights up to 7-1/4″ and 2×10’s for higher risers. For treads you can use 2×12’s (which is the easiest option). However, if you decide to use (2) 6 inch wide treads instead…wood or composite, you will need to use cleat brackets to bridge between the risers for tread support. Time saving tip: when you determine how many steps you will need and your stair width….get all your risers and treads pre-cut to exact lengths when you purchase the materials.

Tools/Materials needed will be: a power drill, saw (skill saw is preferable, but not required, #8 1 1/4″ Phillips flat head or star/square drive screws for the stair brackets, #8 2 1/2″ deck screws for every 9″ of tread and riser connection and Spacers for customized riser and tread measurements.

The “Engineered Stair Bracket System” method eliminates the need to cut stringers and is tested to be much stronger and faster than conventional construction. Whether you’re a seasoned professional or a do-it-yourselfer, you will build fast, strong and accurate stairs, on a budget.

EZ Stairs is the only adjustable, engineered stair bracket system available anywhere, ICC approved. It won Pro Sales Magazine’s Editor’s 2004 Choice award for new product innovation in construction. EZ Stairs’ composite deck stairs compatibility solution was chosen for LBM Journal’s ‘Hot Products’ Award at the 2005 and 2008 International Builders Show. Easy installation, strong and professional. The system is engineered so that even someone with minimal building skills, can build stairs easily, and pros can just build faster- equaling more profit. For more information, visit the ez-stair.com website, or call 866-693-9570. See an EZ Stairs 3D demo and photos.

About the Author

Richard Truckner, holder of 12 plus patents in construction related products. Bachelor of Technology in Architecture; career spanning 40 plus years. Richard is the inventor of EZ Stairs.

http://www.articlerich.com/blog/home-improvement/building-deck-stairs-on-a-budget-by-richard-truckner-leslie-walker

Guide to Different Types of Stair Lifts

With the development of modern sciences, many new inventions have been introduced to the world to make life easier. Since the dawn of humanity man has always been in search of discovering different ways to make life easier - and that quest is still going on. In recent years, many new innovative machines and tools have been introduced to the market, which are specifically designed to help the disabled and allow them more freedom of movement and independence. One such innovative machine is the stair lift, which is used to help the disabled in climbing stairs without the help of another person.

There are different kinds of stair lifts to fulfil the needs of different people with different conditions and disabilities. They can be installed on almost any type of stairway, regardless of the length of the stairway. Whether the stair case is spiral or straight, a stair lift can be installed even in the most toughest spots. They are generally intended for indoor use, however there are lifts that have been specifically designed for out door use.

There are generally two main types of stair lift - standing stair lifts and seated stair lifts. Standing ones are those that can be used by people who have no problem in standing or walking but are unable, or experience difficulty in, bending their legs. These people include those with medical disorders that prevent them from bending their legs. This type of stair lift does not need a lot space to be installed and therefore can be used in tight and narrow spaces with ease. The seated stair lifts are those which are generally used by people who have a problem with standing for long periods, or are completely disabled and cannot stand at all (for example, people in wheel chairs). These stair lifts consist of a seat that runs along the stairs, thus allowing the user to climb up and down the stairs without having to stand at all. Some companies even offer seats with foldable arms to provide maximum support to the physically disabled.

Another type of stair lift is the wheelchair lift, which is designed for those people who cannot get up from their wheelchair with ease. It consists of a mechanism that transports the entire wheelchair along the stairway, thus there is no need to get up from the wheelchair at all. Yet another type of stair lift is the one called preaching stair lift which is designed for those who need just a little support while standing. It is almost the same as the standing lift but with an added support for the back of the disabled person.

It would be difficult for an ordinary person to determine which type of stair lift would be best for him/her, therefore the companies that provide stair lifts also have well trained working staff which can help the consumer choose the right stair lift for an individual. Also, it would be advisable to consult a doctor or therapist as they know the condition of the patient and will therefore be able to give a better suggestion as to which stair lift should be installed. As the stair lifts are machines, the ones with maximum warranty should be considered first to make sure the investment does not go to waste.

Tag : stair lifts,stair design,stair wood,stair building Article Source: http://EzineArticles.com/?expert=Brinkmann_Hamer

What Are the Main Differences Between Cheap and Expensive Stair Lifts?

One of the greatest inventions of modern times is the stairlift. Stair lifts are becoming increasingly popular in the modern age due to their utility and benefits. Stair lifts have restored the freedom to the disabled and elderly that they once possessed. They are now able to move about their homes with as much freedom as that of any healthy member of the family.

However, as beneficial as these stair lifts may be, they certainly are very costly, and you have to plan to invest in these stair lifts with great care. The task of choosing a stair lift that fits well in the budget and also provides all the necessary features for the needed period of time requires great consideration.

Different factors make the price of one stair lift different from the other. The most obvious factor is their design. Some stairlift designs are more expensive than others. For example, circular or round stair lifts are more expensive than straight stairlifts. Similarly, stair lifts equipped to lift heavy weights are more expensive than those designed to lift standard weights.

The quality of the material of the stair lift also affects its price. Naturally, the better the quality of material used in a stair lift, the higher would be its cost. In certain cases, better quality material can be avoided and a stair lift with cheap material would be sufficient. Better quality material ensures a long life and smooth running of the machinery and its various parts. On the other hand, a cheap stairlifts compromises durability and long life for a reduction in price.

Those who are looking for a stair lift for a short span of time are better off with a cheaper stair lift, as it would be pointless for them to buy something for short term use that has been designed for long term use. It would increase the cost of the investment without any reason.

Another difference between expensive and cheap stairlifts might be the after sales service of the company selling the stairlifts. Again, those who are concerned with long term use of the stair lift might need to worry about after sales servicing and maintenance, whereas those who intend to use them for a short span of time need not pay much heed to after sales services provided by the company.

The installation of the stair lift and the area or conditions in which it has to be installed might also create a price difference in the stairlifts. Not all stairlifts can be installed in every location, and thus more complicated stair lift designs are required to fit in tight spots. Thus, the price of these stairlifts is generally higher than that of normal stair lifts.

Expensive stair lifts generally have better finishing and more features than their cheaper alternatives. Many companies throw in a few extra features with their products to justify their higher price. Nevertheless, some of these features might actually be useful and might be among the main requirements of the consumer. Expensive stair lifts also generally provide more safety features than the cheaper alternatives available in the markets.

You can inquire about a stairlift today at Churchills Stairlifts. Tag : stair lifts,stair gate,stair design,wood stair Article Source: http://EzineArticles.com/?expert=Brinkmann_Hamer

You Don't Need to Sell Your Home to Avoid Climbing Stairs - CHAIR LIFT Solutions Make Sense Today

Are you or a loved one having trouble climbing stairs in your home? A stairlift might be the best way to provide the assistance you need for yourself, handicapped or elderly loved ones - to get up and down your stairs. Chair lifts today are convenient home stair lift systems that provide safe and easy ways to give anyone a lift - and provide elderly help with stairs.

Not long ago you may have simply put your home on the market and planned to move into a smaller single-level home without stairs. Chair lifts for stairs, or stair lifts were rarely considered good options. They were expensive, hard to install, and cumbersome.

With our current poor economy and depressed housing market, the option to move may not be feasible any longer. There are so many reasons to avoid selling your home now besides the effort and time to it can take to get your home market-ready quickly.

Instead you can have a home stair lift system installed in just a few weeks without any hassle on your part. Having reliable aid with a stair chair lift installed can save you the time, money, and hassle of moving to a home without stairs.

Stair lift manufacturers have modernized and automated the production of state-of-the-art home stair lift systems. The new motorized stair chair lifts can fit any staircase, indoors or out, without remodeling or pulling up carpeting.

New stair lift designs are available for stair chair lifts and perch stair lifts to carry you or your loved ones up and down your stairs safely, indoors or out. Narrow and curved staircases can be fitted too. The sturdy designs look great with any décor.

Newly designed remote controls make stair chair lifts easy-to-use. Most people now want a battery powered model stair lift instead of an electric stair lift to avoid power cords and connection issues around the stairs for everyone's safety. Seat belts on the stairlift are available for added safety.

The perch stair lift design stair lift design is recommended when sitting is harder than standing while going up and down stairs. Chair lifts fold up so even narrow staircases can be fitted with a sturdy stair lift.

Special outdoor models are available which are designed to withstand Mother Nature so you can also install them on outdoor stairs.

Enjoy Your Home Longer with the Help of a Home Stair Lift System

While it might be a problem selling your home and moving to avoid climbing stairs, it's not a problem finding an easy way to get a lift up your stairs. Chair lift support might be the best answer for you and your family's concerns about climbing stairs.

Get a FREE Video and see How to Get a LIFT on Life With a Stair Chair Lift

You can see the stair lift models and get a free stairlift video showing you how a home stair chair lift or perch stairlift system can improve your life at http://stairlift-home.blogspot.com

Tag : stair lifts,climbing stairs,wood stair,stair design

Article Source: http://EzineArticles.com/?expert=Karen_Mueller

Stair Safety

As we get older, often our sense of balance deteriorates and we are less likely to be able to recover if we trip or stumble. Of those over 65, 1 in 3 will fall at least once a year. In addition, at least 70% of all hospital stays that are related to an injury are as a result of a fall. This is part of the reason that stairs are so dangerous, but many have discovered how a simple lifting device called a stair lift can dramatically reduce this risk.

It is estimated that there are at least 600 people die every year from falling down the stairs. Many elderly people just stop using the upper regions of their home in order to protect themselves from falling down the stairs, but this means that you might have to stop using a large portion of your home. A stair lift is a much better way to ensure stair safety, while allowing you to use all portions of your home. A stair lift is a personal lifting aid that usually attaches directly to the stair case and carries a person up and down the stairs. Those that have a straight stair case can quickly and inexpensively have a stair lift installed. A length of track is attached directly to the stairs. After the track has been secured, an electric motor with a mounted chair, called a car, is attached to the track. The car is responsible for carrying the user up and down the stairs.

Stair lifts usually install on the side of the stairs and it is important to ensure that you do not set objects down in the stair lifts path. All quality stair lifts have built in sensors that detect these objects, but it is still better to ensure that they are not there in the first place. Most support around 300 pounds, but there are several heavy duty units available that can support much more. A heavy duty stair lift will have a reinforced seat and is also often wider.

The actual installation process of a straight stair lift can usually be done in a few hours. It requires only household tools and most people, after reading the installation manual, feel comfortable doing it themselves. It is important that all the steps be followed though, so if you do not feel comfortable doing it yourself, please arrange for professional installation. Your stair lift dealer should be able to provide a professional installation team to assist you.

While most people choose to install their stair lift on the indoors, there are several outdoor models that are available. An outdoor stair lift will be specially treated to withstand the elements and can be installed on wood, concrete, or brick stairs easily. If you are going to install an outdoor stair lift, it is important to consider any branches or trees that might interfere with the movement of the device. It might be a good idea to trim the branches if they look as they could potentially fall on the outdoor stair lift.

Stair lifts are great devices that can help make certain that the stairs can be used safely and easily without any outside help.

David Litel is an experienced writer for A1 Medical Supplies. To find out more about stair lifts, heavy duty stair lifts, and many other home medical lifting aids visit A1 Medical. They are also the number one source for used stair lifts.

Article Source: http://EzineArticles.com/?expert=David_Litel